Program FPGA dialog box

In the Program FPGA dialog box, you can program the FPGA with the bitstream.

The Program FPGA dialog box contains the following items:

Name Function

Hardware Configuration Specify the Bitstream and BMM files. These are provided by XPS when you export your hardware design to SDK.

Bitstream File
In this field, specify the FPGA Bitstream.

BMM File
In this field, specify the BMM file.

Software Configuration Specify the program that is initialized at the reset start address for each processor in the Block RAM.

Processor
Name of the Processor in the System.

ELF file
Specify the ELF file to initialize.

Program Click this button to program the FPGA.

Name	Function
Hardware Configuration	Specify the Bitstream and BMM files. These are provided by XPS when you export your hardware design to SDK.
Bitstream File	In this field, specify the FPGA Bitstream.
BMM File	In this field, specify the BMM file.
Software Configuration	Specify the program that is initialized at the reset start address for each processor in the Block RAM.
Processor	Name of the Processor in the System.
ELF file	Specify the ELF file to initialize.
Program	Click this button to program the FPGA.

JTAG settings
Embedded hardware components

Configuring the JTAG settings
Programming the FPGA